Mazda 5 2006 Owner's Manual page 282

Maintenance and Care
Owner Maintenance
3. Install the new socket and bulb
assembly in the reverse order of
removal.
NOTE
Use the protective cover and carton for
the replacement bulb to dispose of the
old bulb promptly and out of the reach
of children.
Low-beam bulb
1. Disconnect the electrical connector
from the bulb by pulling it to the rear.
2. Pull off the sealing cover.
3. Unhook the bulb retaining spring.
4. Swing the retaining spring out and
away to free the headlight bulb.
8-36
5. Carefully remove the socket and bulb
assembly by pulling it straight back.
6. Remove the headlight bulb from the
socket.
7. Install the new socket and bulb
assembly in the reverse order of
removal.
NOTE
Use the protective cover and carton
l
for the replacement bulb to dispose
of the old bulb promptly and out of
the reach of children.
When reinstalling the sealing cover,
l
make sure faces up.