Mazda 5 2006 Owner's Manual page 150

Driving Your Mazda
Switches and Controls
CAUTION
Do not shade the light sensor by
l
adhering a sticker or a label on the
windshield. Otherwise the light
sensor will not operate correctly.
Light sensor
The light sensor also works as a rain
l
sensor for the auto-wiper control.
When the wiper lever is in the
AUTO position and the ignition
switch is in the ON position, the
wipers may move automatically. Be
careful not to pinch hands or fingers
as it may cause injury, or damage the
wipers (page 5-47).
5-44
NOTE
When the headlight switch is in the
l
AUTO position and the ignition
switch is turned to the ACC or
LOCK position, the headlights, other
exterior lights and dashboard
illumination will turn off.
The timing for turning on the
l
headlights, other exterior lights and
dashboard illumination can be
delayed by adjusting the sensitivity
of the light sensor. Consult an
Authorized Mazda Dealer regarding
sensor adjustment.
qLights-On Reminder
If lights are on and the key is removed
from the ignition switch, a beep sound
will be heard when the driver's door is
opened.
qHeadlight High-Low Beam
Push the lever forward for high beam.
Pull it back for low.
High beam
Low beam