As A Segment Switch Implementing Poe - ProCurve 2610 Series Installation And Getting Started Manual

As a Segment Switch Implementing PoE

Category 5e twisted-pair straight-through or
crossover cable for 1000 Mbps connection to server
Server with
Gigabit
Ethernet NIC
Switch 2610-48 Non-PWR
600 RPS/EPS
Twisted-pair straight-
through or crossover cables
Gigabit
Switch
fiber-optic cable
2610-48-
uplink
Switch 2610-48-PWR PWR
PCs, printers,
Wireless
and local
Access Points
servers
Figure 2-24. Segment network configuration with PoE switches
As shown in the illustration above, the IP telephones have been inserted in
between the Switch 2610-48-PWR and the PCs, and wireless access points
(WAPs) have been connected to another Switch 2610-48-PWR. Both the
telephones and WAPs will receive PoE power from each of the switches. Only
devices directly connected to the PWR switches can receive PoE power.
Devices connected to a non-PWR segment switch cannot receive PoE power.