Table of Contents
Advertisement
Installing Drivers
Installing Windows Drivers
Downloading Windows Drivers
Note:
Drivers for all supported Windows operating systems are included in the same zip file.
To select the correct driver, you need to know if you have a 32-bit or 64-bit operating system. If you do not know,
check System information in the Windows Control Panel.
1.
Go to www.multitech.com/setup/product.go and select your model from the Product drop down list.
2.
Click Drivers and download the Windows driver.
3.
Open the zip file and extract the files for your operating system to a folder in your Program directory.
Installing Drivers for Windows 7, 8 or Server 2012
To install the drivers, the device must be connected to the computer and powered up:
1.
Open the Windows Device Manager.
2.
Under Other Devices, right-click on Unknown Device and select Properties.
3.
Click Update Driver and then click Browse my computer for driver software
4.
Browse to the MultiTech Driver folder you extracted and click OK.
5.
Click Next. If a Windows Security window appears, click Install.
6.
Right-click on Other Devices and select Scan for hardware changes.
This should install the remaining modems. If any of the Unknown Devices do not install automatically, repeat Steps
2 through 5 for each Unknown Device.
Installing Drivers for Windows Vista or Server 2008
To install the drivers, the device must be connected to the computer and powered up. The Found New Hardware
Wizard appears.
1.
Select Locate and install driver software (recommended.
2.
Select Don't search online.
3.
Select Browse my computer for driver software (advanced).
4.
Browse to the MultiTech Driver folder you extracted and click OK.
5.
Click Next. If a Windows security window appears, click Install.
Windows automatically installs the remaining modems.
Installing Drivers for Windows XP or Server 2003
To install the drivers, the device must be connected to the computer and powered up. The Found New Hardware
Wizard appears.
1.
When prompted to connect to Windows update to search for software, select No, not this time and click
Next.
2.
Select Install from a list or specific location (Advanced) and click Next.
3.
Browse to the MultiTech Driver folder you extracted and click OK.
®
MultiModem
USB MTMC8-USB/MTMC16-USB User Guide
INSTALLING DRIVERS
15
Advertisement
Table of Contents
