Chrysler Town & Country 2010 Owner's Manual page 331

330 STARTING AND OPERATING
Odometer 1
Screen Display
Actual Gear(s) 1
Allowed (Six-
Speed Trans-
axle)
Actual Gear(s) 1
Allowed (Four-
Speed Trans-
axle)
NOTE: To select the proper gear position for maximum
deceleration (engine braking), simply press and hold the
shift lever to the left (-). The transaxle will shift to the
range from which the vehicle can best be slowed down.
Reset Mode - Electronic Transaxle
The transaxle is monitored electronically for abnormal
conditions. If a condition is detected that could cause
damage, the transaxle automatically shifts into second
gear (third gear for six-speed). The transaxle remains in
2 3 4 5
1-2 1-3 1-4 1-5
1-2 1-3 1-4 N/A N/A 1–4
second gear (third gear for six-speed) despite the forward
6 D
gear selected. PARK, REVERSE, and NEUTRAL will
continue to operate. This Reset feature allows the vehicle
1-6 1-6
to be driven to an authorized dealer for service without
damaging the transaxle.
In the event of a momentary problem, the transaxle can
be reset to regain all forward gears by performing the
following steps:
1. Stop the vehicle.
2. Shift into PARK.
3. Turn the ignition switch to the OFF position.
4. Restart the engine.
5. Shift into the desired gear range and resume driving.
NOTE: Even if the transaxle can be reset, it is recom-
mended that you visit an authorized dealer at your
earliest possible convenience.