Features - JVC 0597TOV*UN*SN Instructions Manual

PLAYBACK

Features

+
–
COUNTER R/M
STOP
REW
FEATURE:
PURPOSE:
OPERATION:
NOTES:
FEATURE:
PURPOSE:
OPERATION:
NOTE:
PLAY/PAUSE
FEATURE:
PURPOSE:
OPERATION:
FF
NOTE:
FEATURE:
PURPOSE:
OPERATION:
NOTES:
Manual Tracking
To eliminate noise bars that appear
on the screen during playback.
1) Press either +/– button as many
times as necessary for best picture.
To reset TRACKING to the original
preset, press both + and – buttons
simultaneously.
Manual Tracking may not work
with tapes recorded on other VCRs
or camcorders.
Still Playback
To pause during playback.
1) Press PLAY/PAUSE during
playback.
2) To resume normal playback, press
PLAY/PAUSE again.
Noise bars appear and pictures may
become monochrome during Still
Playback. This is normal.
Shuttle Search
To allow high-speed search in either
direction.
Forward Search
1) Press FF during playback.
Reverse Search
1) Press REW during playback.
Noise bars appear and pictures may
become monochrome or darken in
Shuttle Search. This is normal.
Counter Memory Function
To make it easier to locate a specific
tape segment.
1) Press COUNTER R/M and hold for
more than 2 seconds. The counter
resets to "0:00:00".
2) Press COUNTER R/M. "M"
appears.
3) After recording or playback, press
STOP, then REW. The tape
automatically stops at or close to
0:00:00.
4) Press PLAY/PAUSE to start
playback.
The counter memory functions in
the FF and REW modes.
To disable Counter Memory
Function, press COUNTER R/M so
the "M" disappears.
31
EN