Icom IC-746 Faq page 20

A Microphone Adapter for the IC-706
Davidson, Taylor, N4TD
May, 2002, QST, p.38
Describes a microphone preamp/control project that could be easily adapted to the IC-746.
A Quality Sound Card Interface for ICOM Rigs
Lewis, Bob, AA4PB
March, 2002, QST, p.31
A great way to capitalize upon the ACC ports.
Feedback in
May, 2002, QST, p.78
Solving Sound Card Microphone Problems
Covington, Michael A., N4TMI
June, 2000, QST, p.61
Shows a tiny, phantom powered, microphone preamp
Automatic Amplifier Selection for the ICOM IC-746, IC-736 and IC-706MKII
Transceivers
Hewitt, Paul, WD7S
May, 2000, QST, p.33
Operating via the ACC connector (thus bypassing the SEND relay), this project provides
automatic amplifier keying (with ALC selection) based on the Icom band signal.
An External-Amplifier C ontrol Circuit for the IC-706 MK2
Hauff, Fritz, W3NZ
September, 1999, QST, p.80 (Hints+Kinks)
The IC-706 and IC-746 have nearly identical external amplifier interfaces/issues, so most of
the information is relevant.
A Direct Frequency Entry Keypad for ICOM Transceivers
Hansen, John, W2FS
December, 1999, QST, p.38
Adds an external keypad via a PIC and CI-V.
ICOM IC-746 MF/HF/VHF Transceiver (Product Review)
Wolfgang, Larry, WR1B
September, 1998, QST, p.70
IC-746 FAQ
Page 20 of 113
2003-02-08