Integrated - PEUGEOT Elyseo Owner's Manual

Anti-Theft Device *
1
- Removal of anti-theft device
- Put the key into the lock, turn it , and pull the protective
flap in order to remove the anti-theft device.
- Locking the anti-theft device
(the key must be in the lock).
1
Unclip part from its housing, slide it along the cable,
wrap the cable around a fixed point (metal post, 2-wheeler
parking stand, ....)
1 2
- Turn the key and insert part into part ,
- Turn the key , remove it and make sure that
3
the protection flap is correctly in position.
- Storing the anti-theft device
2
- Put the key into the lock, turn it and separate parts
1 and .
2
- Slide part 1 along the cable and store it away in the
housing of part 2 .
- Push the whole unit until it is positioned in the rear part of
the scooter.
- Withdraw the key and make sure that the protection flap
is closed correctly.
3
Advice
1
- When the scooter is parked, avoid leaving the anti-theft
device in contact with the ground.
- When cleaning the scooter, avoid pointing the water hose
into the lock.
- Maintenance of the tube : use a plastic siliconed cleaning
product.
Caution
Do not forget to store the anti-theft device carefully in its
housing before using the vehicle.
3
Placing the theft protection device around the rear wheel
may damage the number plate.
Recommendations for
protection against theft
Use an additional good quality theftproof device.
L *
A treated steel hook rigidly attached to the frame can
be used with a locking device to anchor your scooter to a
fixed point (for example a post).
L *
* According to the model
15