Changing A Bulb - Alfa Romeo MiTo Owner's Manual

174

CHANGING A BULB

GENERAL INSTRUCTIONS
❍ Before changing a bulb check the contacts for oxidation;
❍ blown bulbs must be replaced with others of the same type and
power:
❍ After replacing a headlight bulb, always check its alignment;
❍ When a bulb is not working, check that the corresponding fuse
is intact before replacing it: refer to the "Replacing fuses" para-
graph in this section for the location of fuses.
BULB TYPES fig. 21
The vehicle has the following light bulbs:
A. All glass bulbs: clipped into place. Pull to extract.
B. Bayonet bulbs: to remove this type of bulb from its holder, press
the bulb and turn it anticlockwise.
C. Cylindrical bulbs: release from the contacts to extract.
D. Halogen bulbs: release the fastening clip from the corresponding
seat to remove the bulb.
E. Halogen bulbs: release the fastening clip from the corresponding
seat to remove the bulb.
IN AN EMERGENCY
fig. 21
A0J0117m