Alfa Romeo MiTo Owner's Manual page 141

140
INSTALLATION OF ISOFIX CHILD SEAT
Attach the child seat to the dedicated lower metal rings A-fig. 13
located between the backrest and the cushion, then:
❍ for the passenger side front seat: fasten the upper belt (that
is supplied together with the child seat) to the dedicated mount-
ing B-fig. 14 located at the bottom, near the front seat sliding
guide;
❍ for the rear seat: fasten the upper belt (that is supplied together
with the child seat) to the special mountings C-fig. 14 located
at the rear of the backrest.
It is possible to mount both the traditional restraint system and the
"Universal Isofix" one. Remember that when using a "Universal
Isofix" child seat, you can only use approved seats with the mark-
ing EKE R44/03 "Universal Isofix". The "Universal Isofix" "Duo
Plus" child seat is available from Lineaccessori Alfa Romeo. For any
further installation/details on usage, refer to the "Instruction Man-
ual" for the child seat.
fig. 13
SAFETY
Fit the child seat when the car is stationary. The
child seat is correctly anchored to the brackets
when you hear the click. Follow the instructions for
assembly, disassembly and positioning that the manu-
facturer must supply with the child seat.
A0J0092m fig. 14
A0J0310m