. MOUNTING TO THE TRANSOM
t--lContained parts
[l r.rut O: 55 N.m (5.s kg-m,40.0 tb-ft]
Drill the upper holes at least 2s mn (1.0 in) away from the transom top surface.
lnstall the large diameter washer @ on the transom board side.
To ensure a water-tight engine installation, sealant (SUZUKI STLICONE SEAL or equivalent) should be
applied to all bolt holes.
lf tightening torque cannot reach ta the specified torque due to weak transom material, it is necessary to
reinforce the transom board with an attachment plate.
'\--ITRANSOM DIMENSIONS
Item
Part name
Part number
Q'ty
@
@
@
o
{ F)
rF!
v
Bolt (M12)
Washer (Large)
Washer (Small)
Lock washer
Nut
cap
091 00-1 2083
091 60-12044
091 60-1 2066
091 62-12005
09140-12028
41 1 53-94500
4
4
4
4
4
4
Transom top surlace
"l
3