Counter Rotanon Model Or Dual Engine, T\E-Rod Ktt (O?T\Onal ?Arts) In9Tallation - Suzuki DF140 Setup Manual

couNTER ROTATTON MODEL OR DUAL ENG|NE,TTE-ROD KtT (OpilONAL
- PARTS) TNSTALLATTON
TIE-ROD KIT (OPTIONAL PARTS) Contained parts
Item Part Name Q'ty
1 TIE.ROD ASSY
1
2
BRACKET, TIE-ROD
2
3
BOLT, TrE-ROD (UNF)
z
4
NUI TIE-ROD
2
5
BOLI TIE-ROD BRACKET(MI 2)
4
o
WASHER. TIE-ROD BRACKET
4
7 SPACER. TIE.ROD
2
8 INSTRUCTION, TIE-ROD
4
I TAPE
1
Parts installation Procedure
(1) lnstalt the tie-rod bracket @ on the end of steering bracket using the bolts @ and washers @.
[t
eot @ : 85 N'm (8.5 kg-m, 61.0 lb-ft)
'-
(2) Install the tie-rod assy e on the bottom side of tie-rod bracket @ with the spacer @ positioned in
between using the bolt @.
[!
aon @ : 5o N.m (5.0 kg--, 36.0 lb-ft)
(3) Tighten the nut @ to tne end of bolt @ that has been installed in the step 2) above. (When tightening the
\/.
nut @, hold the bolt @ securely so as not to come loose.)
S
ttut @ : 30 N'm (3.0 kg-m,21.5 lb-ft)
Suzukirecommends
that only authorized Suzuki outboard motor dealeror a qualified service mechanic pertorm installation
of this kit.
11