Upholstery - Four winns Vista 328 Owner's Manual

N - 1 INTERIOR SEATING
A. Cabin Tables
A dinette is standard on the 298 and is conveniently
located in the main cabin, on the port side across from
the galley. While the 328’s dinette table is located on
the starboard side. Table bases are “flush” mounted for
convenience. Table legs are removable. Rotating the leg
while lifting will ease the removal. See Figure N1. Stor-
age is provided below the dinette cushions.
Aft
Dinette
Cushion
Floor
Mount
Figure N1: 328V Dinette Table
The dinette area can be converted into sleeping quarters
with the use of filler cushions, “short” table leg, and di-
nette table. (Note: The filler cushions are also the
backrest cushions). To convert the dinette area into a
berth follow the steps below:
1. Remove the dinette table from the “long” table leg.
2. Remove the “long” table leg from its floor mount.
Rotating the leg while lifting will ease the removal.
3. Insert “short” table leg into the floor mount.
4. Place the dinette table onto the “short” leg.
5. Remove the backrest cushions and place them on
the dinette table.
Reverse this procedure to return the berth back into a
dinette.
298/328 Vista Owner’s Manual
09/00

UPHOLSTERY

Dinette
Table
Fwd
Dinette
Cushion
Table Leg
Center Dinette Cushion
A mid cabin table is also provided on the 328 Vista®
only. The mid cabin table can be stored in the aft cabin
storage closet. The table leg screws into the floor mount
and the table then mounts onto the table leg.
B. V-berth or Forward Cabin
Four Winns provides cushions for the v-berth/forward cabin
area. These cushions simply drop into place. To gain
access to the v-berth storage and water storage tank,
remove the cushions. See Figures N2 and N3.
The forward cabin also comes with a privacy curtain and
hanging locker storage.
Forward V- BerthCushion
Port V-BerthCushion
Figure N2: 328V V-Berth Cushions
Bow Eye Cover
V-Berth Storage Lid
Figure N3: 328V V-Berth Storage Lid & Water Tank Lid
Starboard V-
Berth Cushion
Water Tank Lid
Section N
Page 1