Connecting/Disconnecting The Sl Loudspeaker 52 A To/From The Mains Power Supply; Switching The Sl Loudspeaker 52 A On/Off - Sennheiser SpeechLine Instruction Manual

Installing the SL Loudspeaker 52 A
Mains power
POWER /
Power mode
POWER MODE
ON
AUTO SLEEP
POSITION ADJUSTMENTS
20 | SL Loudspeaker 52 A
Connecting/disconnecting the SL Loudspeaker 52 A to/from the
mains power supply
Mains cables for the SL Loudspeaker 52 A are available in different
lengths as accessories on the product page of the SL Loudspeaker 52 A at
www.sennheiser.com.
To connect the SL Loudspeaker 52 A to the mains power supply:
Make sure that the POWER
X
Connect the IEC connector of the mains cable to the mains socket.
X
Connect the mains plug of the mains cable to a suitable wall socket.
X
To disconnect the SL Loudspeaker 52 A from the mains power supply:
Set the POWER switch to the off position.
X
Pull the mains plug out of the wall socket.
X

Switching the SL Loudspeaker 52 A on/off

To switch the loudspeaker on or off:
Set the POWER switch to:
X
• "I" to switch on the loudspeaker.
• the off position to switch off the loudspeaker.
To select the power mode of the loudspeaker:
Set the POWER MODE switch to:
X
• "ON" to have the loudspeaker permanently switched on.
• "AUTO SLEEP" to have the loudspeaker enter sleep mode when no audio
signal is present for a period of 20 minutes.
switch is switched off.