Yamaha YFM660RN Service Manual page 312

EB806024
2.If the neutral indicator light fails to come on:
1.Bulb and bulb socket
Check the bulb and bulb socket for continu-
ity.
2.Neutral switch
Refer to "CHECKING THE SWITCH".
3.Voltage
Connect the pocket tester (DC 20V) to the
bulb socket coupler.
Tester (+) lead → Brown terminal 1
Tester (–) lead → Sky blue terminal 2
Turn the main switch to "ON".
Check the voltage (12 V).
This circuit is not faulty.
CONTINUITY
CONTINUITY
MEETS
SPECIFICATION
8 - 31
SIGNAL SYSTEM
NO CONTINUITY
Replace the bulb and/or bulb socket.
NO CONTINUITY
Replace the neutral switch.
OUT OF SPECIFICATION
The wiring circuit from the main switch to the
bulb socket connector is faulty, repair it.
– +
ELEC