Yamaha YFM660RN Service Manual page 233

CLUTCH
5.Install:
Clutch spring
NOTE:
Tighten the bolts in stages, using a crisscross
pattern.
6.Install:
Clutch cover
NOTE:
Be sure to mesh the pull lever shaft with the
pull rod teeth to ensure that the mark a on pull
lever 1 is at the closest position to stationary
pointer b onto the clutch cover when the
clutch is engaged.
7.Install:
Clutch cable holder 1
Bolts
2 Bolt:
= 25 mm
3 Bolt:
= 30 mm
4 Bolt:
= 35 mm
5 Bolt:
= 50 mm
NOTE:
Tighten the bolts in stages, using a crisscross
pattern.
5 - 53
ENG
8 Nm (0.8 m • kg, 5.8 ft • lb)
10 Nm (1.0 m • kg, 7.2 ft • lb)