Cassette
16.
If you are using a cassette recorder to test your system, follow
the procedures below:
Familiarize yourself with your Cassette Users Manual
•
before continuing.
•
Insert Diagnostic Aids cassette.
•
Rewind to the beginning.
•
Position System Unit switch to ON. (Wait for Self-test to
complete.)
•
Turn volume on cassette to high.
•
Press play on cassette recorder.
•
Type
load"ldcass
on keyboard.
•
Press
~
enter.
•
Look to verify that your cassette is turning.
•
Wait for .B found to appear on screen, then wait for Ok to
appear on screen.
•
Type RUN on keyboard.
•
Press
~
enter.
•
Wait for option frame, approximately a minute or two.
•
Look to verify that your cassette is turning.
•
When cassette is loaded the screen will be similar to the
figure below.
Step 16 continues on next page.
Setup 2-17