Finding Out What The Statements Are - IBM 5150 Manual To Operations

Finding Out What the Statements Are
BASIC's LIST command displays the statements in the
BASIC program that is currently loaded.
Let's use our ORIG
123
file to demonstrate. Assume
for this example that drive A: is the default drive.
I
Make sure Disk BASIC or Advanced BASIC is ready- Ok
is displayed.
2
Insert the diskette with ORIG
123
on it into drive A:.
3
Type this:
load "orig123
and press the En ter key.
4
Now the program in the file ORIG
123
.BAS is loaded
from the diskette, and then the BASIC prompt, Ok, is
displayed.
5
Type:
list
and press the Enter key.
Program statements are listed on the screen. For our
example, it should look like this:
Ok
load "orig123
Ok
list
10 PRINT 1
20 PRINT 2
30 PRINT 3
Ok
.BASIC
3-23