Loading Cassette
4.
If you are using a cassette recorder to test your system, follow
the procedures below:
•
Familiarize yourself with your cassette users manual
before con tinuing.
•
Insert Diagnostic Aids cassette.
•
Rewind to the beginning.
•
Position System Unit switch to ON. (Wait for the Self-test
to complete.)
•
Turn volume on cassette recorder to high.
•
Press play on cassette recorder.
•
Type load"ldcass on keyboard.
•
Press
Q
enter.
•
Look to verify that your cassette is turning.
•
Wait for "Idcass .B found" to appear on screen, then wait for
"OK"
to appear on screen.
•
Type RUN on keyboard.
•
Press
~
enter
•
Wait for option frame, approximately a minute or two.
•
Look to verify that your cassette is turning.
•
When cassette is loaded, the screen will be similar to the
figure on the foHowing page.
PDPs 4-18