Specifications - Generac Power Systems 7kW Installation And Owner's Manual

Air-cooled, automatic standby generators

Hide thumbs Also See for 7kW:

Repair manual (210 pages)

Installation manuallines (68 pages)

Owner's manual (45 pages)

Table Of Contents

Table of Contents

1.5

SPECIFICATIONS

1.5.1 GENERATOR

Model

Rated Max. Continuous Power

Capacity (Watts*)

Rated Voltage

Rated Max. Continuous Load Current (Amps)

120 Volts** (NG/LP)

240 Volts (NG/LP)

Main Line Circuit Breaker

Circuits***

50A, 240V

40A, 240V

30A, 240V

20A, 240V

20A, 120V

15A, 120V

Phase

Number or Rotor Poles

Rated AC Frequency

Power Factor

Battery Requirement

Weight (unit only in pounds)

Enclosure

Normal Operating Range

* Maximum wattage and current are subject to and limited by such factors as fuel Btu content, ambient temperature, altitude, engine power and condition, etc. Maximum power decreases about 3.5 per-

cent for each 1,000 feet above sea level; and also will decrease about 1 percent for each 6° C (10° F) above 16° C (60° F) ambient temperature.

** Load current values shown for 120 volts are maximum TOTAL values for two separate circuits. The maximum current in each circuit must not exceed the value stated for 240 volts.

*** Circuits to be moved must be protected by same size breaker. For example, a 15 amp circuit in main panel must be a 15 amp circuit in transfer switch.

1.5.2 ENGINE

Model

Type of Engine

Number of Cylinders

Rated Horsepower @3,600 rpm

Displacement

Cylinder Block

Valve Arrangement

Ignition System

Recommended Spark Plug

Spark Plug Gap

Compression Ratio