Table 1: Notice Icons; Table 2: Ex2500 Text And Syntax Conventions - Juniper EX2500 Configuration Manual

EX2500 Ethernet Switch Configuration Guide
Documentation Conventions

Table 2: EX2500 Text and Syntax Conventions

Convention
Bold text like this
Bold text like this
Braces { }
Brackets [ ]
Fixed-width text
like this
Italic text like this
<Italic text like this in
angle brackets>
Plain text like this
Vertical line |
xii
Documentation Conventions
Table 1 describes the notice icons used in this manual.
Table 2 describes the EX2500 text and syntax conventions.

Table 1: Notice Icons

Icon Meaning
Informational note
Caution
Warning
Laser warning
Usage
Names of windows, dialog boxes, buttons, tabs,
and other objects in a user interface that you
click or select.
In syntax descriptions and set-off command
examples, text you must type exactly as shown
Required elements in syntax that has more
than one option. You must choose one of the
options. Do not type the braces.
Optional elements in syntax descriptions. Do
not type the brackets.
Onscreen computer output
Book titles, special terms, and words to be
emphasized
Variables in command syntax. Replace the
italic text with the appropriate real name or
value when entering the command. Do not
type the brackets.
Names of commands, files, and directories
used within the text
Separates choices for command keywords and
arguments. Enter only one choice. Do not type
the vertical line.
Description
Indicates important features or instructions.
Indicates a situation that might result in loss of data or
hardware damage.
Alerts you to the risk of personal injury or death.
Alerts you to the risk of personal injury from a laser.
Examples
Click the Submit button on the bottom of the form.
Main# sys
show portchannel {<1-12> | hash | information}
(For example, you can enter either
, or
show portchannel hash show portchannel
information .)
copy running config tftp [data-port | mgt-port]
(You enter either
copy running config tftp data-port
, or
running config tftp mgt-port
ex2500(config)# reload
Reset will use software "image2"...
See the EX2500 Ethernet Switch Command Reference.
To establish a Telnet session, enter
host# telnet <IP address>
(For example, you can enter
View the readme.txt file.
copy running config tftp [data-port | mgt-port]
(You enter either copy running config tftp data-port
, or
running config tftp mgt-port
,
show portchannel 3
,
copy
.)
copy running config tftp
telnet 192.32.10.12 .)
, copy
.)
copy running config tftp