Elation Trio-1248 Manual page 31

Trio-1248
Press A to choose "Rainbow", the LCD shows you:
-"Color Number" allows you to select the color library in the range of 1-10. Press A (item set)
to highlight "1: Color Number", then press FX1-10 to choose the color type from 1 to 10.
-"Color Size" allows you to set the distance between 2 colors in the range of 1-10. Press A
(item set) to highlight "2:Color Size", and press FX1-10 to choose the size from 1-10.
-The "Speed" can be set by means of StepRate. Press A (item set) to highlight "3:Speed",
then push Step Rate to set the speed value.
-The "Direct" (Direction) can be swapped between "Left" and "Right". Press B to select the
Direct as Left or Right.
-Press D to select "Run" or "Stop".
In this mode, your console allows you to preset the value for the color you have selected. Press C to
choose "Color Set", the LCD will display:
-There are a total of 57 color types available for selection in each Color Library. If you do not
like the present color type, you can press the C key to choose additional color types.
-Also, if you are not satisfied with the configuration of RGB, you can push the Red, Green and
Blue faders to set your desired color.
-Press FX1-FX10 to select ColorLib 1-10.
-The selected color will output to your LED fixture.
-Press D to select "Enter" and confirm your settings.
Elation Professional® www.elationlighting.com - Trio-1248 - Page 30
Rain Bow
MENU
1:Color Number[10]
CLEAR
2: Color Size
BUFFER
3: Speed: ---------
DMX 4: Direct:
BASE
Master: xxx
FX
Item
Set
DirBy
[10]
Set
Color
Left
Set
Run
oPErATioN - LEd modE
A
B
C
D