Oster Digital Blender User Manual page 5

d C
IgItal ontrols
To use the "SPEED" mode:
1. Press the POWeR button to turn the product on.
2. C onfirm the Blender is set to the "SPEED" Mode - the red indicator light next to
"SPEED" will be lit.
3. Press the Arrow "▲– (Up)"" ▼– (Down)" to switch between speeds.
4. Put the ingredients into the jar.
5. Secure the lid and filler cap.
6. P ress the START/STOP button to blend as desired, or you can use the TIMeR for
up to 60 seconds (see below). Pressing the POWeR button stops the motor and
turns the blender off.
(Note: T his blender is programmed to turn the power off automatically if
not used for a period of several minutes.)
To use the "TIMER" mode:
1. Press the POWeR button to turn the product on.
2. S et to desired speed, then press the MODe function button until the red indicator
light next to "TIMER" is lit.
3. P ress the Arrow "▲– (Up)"" ▼– (Down)" to switch to desired time (in seconds).
TIMeR goes up to 60 seconds and is in increments of 5 seconds.
4. Press START/STOP to begin blending.
5. O nce the program is finished, the product AUTOMATICALLY stops.
Please note: You may press the "START/STOP" button to cancel the program
at any time.
To use the "PUlSE" mode:
1. P ress the POWeR button to turn the product on.
2. P ress MODe until PULSe red indicator light is lit.
3. Press the Arrow "▲– (Up)""▼– (Down)" to switch to desired Pulse level.
4. P ress and hold down START/STOP button for desired length of time. Release and
allow blade to stop. Repeat cycle as desired.
To use the "cRUSH IcE" mode:
1. P ress the POWeR button to turn the product on.
2. P ress MODe until the red indicator light next to "cRUSH IcE" is lit.
3. Press the Arrow "▲– (Up)"" ▼– (Down)" to switch to desired ice-crushing level.
4. C rush 6 ice cubes or approximately 2 cups of ice at a time.
5. S ecure the lid and filler cap.
5