Securing Child In Carrier - Chicco KeyFit 30 User Manual

SECURING CHILD IN CARRIER

Loosen harness by firmly
1
pressing adjuster button and
pulling forward on both straps.
Press button on buckle to
2
release buckle tongues.
Separate chest clip and spread
3
straps apart. Place child in carrier
in seated position.
Child must be resting against back and
bottom of carrier.
Pull harness straps over child's
4
shoulders and around their waist.
Make sure that harness slots are AT or
BELOW top of child's shoulders.
If harness straps are
not AT or BELOW child's
shoulders, you must move
harness to proper slots. See
"Changing Harness Height"
on page 25.
1
2
3
4
26
SECURING CHILD IN CARRIER
Insert buckle tongues into
5
buckle. Listen for a click.
Tug on tongues to verify that they
are latched.
Pull excess strap up through
buckle tongues so that harness is
snug around child's thighs.
Snap chest clip together and
6
slide away from child's neck before
tightening harness.
Tighten harness by pulling
7
slowly on adjuster strap until
harness is snug around child.
Make sure child is properly
8
secured.
a Harness must be snug. If you
can pinch a fold in strap, harness
is too loose.
Chest Clip must be positioned
b
at center of child's chest, level
with armpits.
c Straps must be laying flat,
free of twists and on top of
child's shoulders.
Read the "Safety Tips
for Securing Child" and the
"Secure Child Checklist".
5
6
CLICK!
7
8
27