Jøtul GF 100 DV Nordic QT Installation And Operation Instructions Manual page 11

Figure 11.
CORNER INSTALLATION
45° Elbow
Max. Horizontal Run into a STANDARD HORIZONTAL
CAP : 45° elbow + 9" + 6" sections (totalling 17"
horizontal).
installing the stove with a 1 ft.
vertical directly off the rear of
the stove.
12" MINIMUM
vertical rise when
installing a 90°
elbow directly off
the rear of the stove
WALL THIMBLE required in all installations passing through combustible
Figure 12. A vertical run in a horizontally-terminated
installation must rise a minimum of 1 ft. The horizontal
run must be a minimum of 1 ft.
Standard
HORIZONTAL
TERM. CAP
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
12" Maximum horizontal when
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
1 2 1 2
Termination
off 1 ft. rise
wall.
Wall Shield Installation
The decorative Wall Shield, included with the Nordic QT,
is used to cover the vent hole in the wall in installations
vented directly off the rear of the stove. Follow this
procedure:
1. Remove the top two 1/4" hex head screws from the
rear shroud of the stove.
2. Align the holes in the wall shield with the holes in the
rear shroud.
3. Secure the wall shield to the stove with the two 1/4"
hex head screws. See fig. 13.
Figure 13.
Wall Shield installation.
Centerline
and two
90° elbows
= 38 1/4"
(97.55 cm)
Figure 14. Termination
Clearance to overhangs
11