How To Access Service Mode - Samsung HLS5087WX/XAA Service Manual

Alignment & Adjustment

3-2 How to Access Service Mode

1. Turn off the power to put the unit into the STAND-BY mode.
2. In order to enter the Service Mode, Press "Mute" → "1" → "8" → "2" → "POWER" button on the Remote Control.
In case entry into SERVICE MODE is unsuccessful, repeat the procedures above.
3. Initial DISPLAY State in times of Service Mode Switch overs
OPTION CHECKSUM
DDP3021 SERVICE
CCA(OFF)
SP Actuator
DNIE
TC90103
SAA7119
MST33X9
SDP51(M)
SDP51(S)
SDP52
S5H2200
KS1409-TUNER
STV82X8
Cinema CCA
ESP
T_GALIAUS0_00XX
2006_XX_XX
T-GALIUCOM5-60XX
T-GAIAUS1_XX
4. Buttons operations within Service Mode
MENU
Direction keys ▲ / ▼
Direction keys ◀ / ▶
Source
Enter
3-2
Full Menu Display / Move to Parent Menu
Item Selection by Moving the Cursor
Data Increase/Decrease for the Selected Item
Cycles through the active input source that are connected to the unit
Item Selection/execution
www.fieldtechsource.net
Samsung Electronics