Remote Control - Samsung HLS5087WX/XAA Service Manual

Operation Instruction & Installation

11-1-5 Remote Control

You can use the remote control up to about 23 feet from the TV. When using the remote control, always point it directly at the TV.
You can also use your remote control to operate your VCR, Cable box, DVD player or Samsung Set-Top Box.
1. POWER
Turns the TV on and off.
2. Channel Number
Press to directly tune to a particular
channel.
3. -
Press to select additional channels (digital
and analog) being broadcast by the same
station. For example, to select channel
"54-3", press "54", then press "-" and "3".
4. ANTENNA
Press to select "AIR"or "CABLE".
5. CH MGR
Used to display Channel lists on the
screen.
6. VCR/DVD Controls
Controls VCR or DVD functions: Rewind,
Stop, Play/Pause, Fast Forward.
7. VOL +, VOL -
Press to increase or decrease the volume.
8. MUTE
Press to mute the TV sound.
9. MENU
Displays the main on-screen menu.
10. ▲, ▼, ◀, ▶, ENTER
Press to select highlight up, down, left, or
right. While using the on-screen menus,
press ENTER to activate (or change) a
particular item.
11. INFO
Press to display information on the TV
screen.
12. CAPTION
Controls the caption decoder.
13. P.MODE
Adjust the TV picture by selecting one of
the preset factory settings (or select your
personal, customized picture settings.)
14. S.MODE
Select Sound effect.
15. MTS (Multichannel Television
Stereo)
Press to choose Stereo, Mono or SAP
(Secondary Audio Program).
16. SRS
Activates TruSurround.
11-4
17. Mode
(TV/DVD/STB/CABLE/VCR)
Selects a target device to be controlled by
the Samsung remote control (i.e., TV, DVD,
STB, CABLE, or VCR).
18. SOURCE
Press to display all of the available video
sources (TV, AV1, AV2, AV3, S-Video1,
S-Video2, Component1, Component2, PC,
HDMI1, and HDMI2).
19. PRE-CH
Tunes to the previous channel.
20. WISELINK
This function enables you to load saved
photo (JPEG) and audio files (MP3) and to
view or play them on the TV.
21. FAV.CH (Favorite Channel)
Press to switch between your favorite
channels.
22. CH ∧ / ∨
∧
Press to change channels.
23. EXIT
Press to exit the menu.
24. SLEEP
Press to select a preset time interval for
automatic shut off.
25. P.SIZE
Press to change the screen size.
26. STILL
Press to pause the current screen.
27. RESET
If your remote control is not functioning
properly, take out the batteries and press
the reset button for about 2~3 seconds.
Re-insert the batteries and try using the
remote control again.
28. SET
Used during set up of this remote control,
so that it will work compatibly with other
devices (some Samsung Set-top boxes, VCR,
Cable box, DVD, etc.)
NOTES
* The Color button is used during the
channel list.
* This is a special remote control for the
visually impaired, and has Braille
points on the buttons.
www.fieldtechsource.net
Samsung Electronics