APRILIA SXV / RXV 450 550 Use And Maintenance Book page 125

SXV / RXV 450 - 550
• Loosen the bleed valve by 1/4 of a turn so as the brake
fluid flows in the container,
tension from the lever and help it travel fully home.
•
Retighten the bleed valve before the lever is fully
squeezed in.
•
Repeat process until the fluid draining into the
container is totally clear of air bubbles.
NOTE While bleeding the hydraulic circuit, top up reservoir
with brake fluid as required. Make sure there is always some
fluid in the reservoir throughout the process.
• Tighten the bleed valve and remove the tubing.
•
Top up fluid inside tank.
•
Refit the rubber cap.
this will remove any
MAINTENANCE
3 - 49