Table of Contents
Advertisement
MAINTENANCE
•
Unscrew and remove the inspection plug (2).
•
Fill with new oil, see (LUBRICANT TABLE), until oil
reaches inspection plug hole (2).
•
Wait a few minutes to allow oil to get from the clutch to
the gearbox, then check level again.
•
Tighten the filler plug (3).
WARNING
Oil flow from clutch to gearbox and vice versa
can
be
particularly
temperature, oil or engine temperature is low.
WARNING
Do not put additives or other substances into
the fluid.
If you use a funnel or other similar items, make
sure that they are perfectly clean.
•
Refit the rear brake lever, ensure you fit the washer in-
between lever and casing, tighten screw (1).
3 - 40
slow
if
the
ambient
SXV / RXV 450 - 550
Hide quick links:
Advertisement
Chapters
Table of Contents
