Diagnostic Assist Code "04" Radio Reception Condition Inspection - Mazda RX-8 Workshop Manual

3. Press the POWER/VOLUME switch to return to the diagnostic assist code input screen.
4. Press the POWER/VOLUME switch to release the diagnostic assist function.

Diagnostic assist code "04" radio reception condition inspection

1. Launch the diagnostic assist function with the radio power on and the radio receiving
broadcasts. (See
2. Press the "Diagnostic assist code input switch", and input the diagnostic assist code "04".
3. Select "ENTER".
4. Inspect according to the following table:
CAUTION:
Even if the system is normal, radio reception may be difficult depending on where
the system is inspected (indoors/outdoors, or conditions at the location). Before
inspecting the system, verify that radio reception is adequate.
When performing the inspection, select the best area for receiving radio
frequencies.
2. Center
speaker
3. Front
door
speaker
and
front
tweeter
(RH)
4. Rear
speaker
and
rear
tweeter
(RH)
5. Rear
speaker
and
rear
tweeter
(LH)
Starting Procedure.)
Display (AM
(See
SOME SPEAKERS
—
No
NO.4 NO SOUND FROM
[AUDIO].)