< Previous Next >
2011 - RX-8 - Engine
ON-BOARD DIAGNOSTIC TEST [13B-MSP]
DTC Reading Procedure
1. Connect the M-MDS to the DLC–2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-
MDS.
When using the IDS (laptop PC)
When using the PDS (Pocket PC)
3. Verify the DTC according to the directions on the M-MDS screen.
If any DTCs are displayed, perform troubleshooting according to the
corresponding DTC inspection.
Select "Self Test".
Select "Modules".
Select "PCM".
Select "Module Tests".
Select "PCM".
Select "Self Test".