Jeep Grand Cherokee Owner's Manual page 269

• Most of the time, when in Automatic operation, you
can temporarily put the system into Recirculation
mode by pressing the "Recirculation" button. How-
ever, under certain conditions in automatic the system
is blowing air out of the defrost vents. When these
conditions are present, and the "Recirculation" button
is pressed, the indicator will flash and remain off. This
tells you that you are unable to go into Recirculation
mode at this time. If you would like to go to Recircu-
lation mode, you must first move your mode knob to
Panel, Panel/Floor, or Floor, then press the "Recircu-
lation" button. This feature will reduce the possibility
of window fogging.
UNDERSTANDING YOUR INSTRUMENT PANEL 267
Manual Operation
This system offers a full complement of manual override
features which consist of Blower Preferred Automatic,
Mode Preferred Automatic with Manual Air Temperature
Control, and Manual. This means the customer can
override the blower, mode, and disable the Automatic
Temperature Control completely.
NOTE: Please read the Automatic Temperature Control
Operation Chart below for details.
I n f o r m a t i o n P r o v i d e d b y :
4