tings by pressing the buttons. The ac-
tivated settings are highlighted
brightly on the display.
ATTENTION!
Pressing on the display with force
may cause damage.
Do not apply heavy pressure on
▶
the display.
Do not press on the display using
▶
pointed or sharp objects.
Displaying or hiding additional
buttons
Some buttons are hidden for a re-
duced display. If you display these
additional buttons on the display, you
can activate or deactivate the corres-
ponding settings.
To display the additional buttons,
1.
briefly press Optionen.
a The display shows all additional
buttons.
Before using for the first time en
To hide the additional buttons,
2.
briefly press Optionen again.
Changing a setting value
If you activate certain settings, the
display shows selection buttons and
you can change the setting value.
Press the selection buttons
▶
→ Page 23.
The display shows the setting
value.
Before using for the first time
6 Before using for the
first time
Prepare the appliance for use.
Before using for the first time
6.1 Starting an empty wash-
ing cycle
Your appliance was inspected thor-
oughly before leaving the factory. To
remove any residual water, run the
first wash cycle without any laundry.
Press .
1.
The switch-on process takes a few
seconds.
Select the Baumwolle 90°C pro-
2.
gramme or the drum cleaning pro-
gramme in the Home Connect
app.
Close the door.
3.
Pull out the detergent drawer.
4.
19