Battery; Battery Charge - Panasonic KX-TG7100ES Service Manual

KX-TG7100ES/KX-TG7102ES/KX-TG7103ES/KX-TGA710ES
6.2.

Battery

6.2.1. Battery Installation/Replacement
Important:
• Use only the included rechargeable batteries HHR-55AAAB
or HHR-4EPT.
• When replacing batteries, we recommend using the
Panasonic rechargeable batteries P03P.
6.2.2.

Battery Charge

Place the handset on the base unit or charger for about
7 hours before initial use.
When charging, the battery icon is shown as follows.
When the batteries are fully charged,
display.
• The charge indicator lights up when the handset is placed on
the base unit or charger.
Note:
• It is normal for the handset to feel warm during charging.
• If you want to use the unit immediately, charge the batteries
for at least 15 minutes.
• Clean the charge contacts of the handset, base unit, and
charger with a soft, dry cloth, otherwise the batteries may
not charge properly. Clean if the unit is exposed to grease,
dust or high humidity.
6.2.3.
6.2.4.
Note:
• It is normal for batteries not to reach full capacity at the initial
charge. Maximum battery performance is reached after a
few complete cycles of charge/discharge (use).
• Actual battery performance depends on a combination of
how often the handset is in use and how often it is not in use
(standby).
• Battery operating time may be shortened over time
depending on usage conditions and ambient temperature.
• Even after the handset is fully charged, the handset can be
left on the base unit or charger without any ill effect on the
batteries.
• The battery strength may not be displayed correctly after you
replace the batteries. In this case, place the handset on the
base unit or charger and charge for at least 7 hours.
remains on the
16
Battery Strength
Panasonic Ni-MH Battery
Performance (included batteries)