Connect Your Phone; Connect The Power - ooma Hub Quick Start Manual

10
installing the ooma scout
connect the phone line
1
If you have DSL, trace the phone cable to the wall.
UNpLUg and REMOVE any existing DSL filters or
splitters.
Unplug the phone cable from your phone and plug it
in the port labeled

connect your phone

2
Use a phone cable to plug your phone into the port
labeled
phOne
cable is provided).

connect the power

3
Plug one end of the AC adaptor into the port labeled
on the ooma Scout and the other end into a
pOwer
power outlet.
After 30 seconds, the clear ooma Tab at the top left
corner should turn BLUE.
install more ooma Scout devices
4
Locate other phones that share the same phone line or
phone number as the ooma Hub. Repeat steps 1-3 for
each phone.
If you do not have an ooma Scout for each phone,
you must DISCONNECT those phones or your ooma
service will be disrupted. Additional ooma Scout
devices can be purchased in the online ooma Lounge.
on the ooma Scout.
wall
on the ooma Scout (a short phone
WALL
PHONE