Back-Up Lamps - Chevrolet 2011 Malibu Owner's Manual

5. Disconnect the wiring harness
connector (C) from the LED (B).
6. Turn the LED (B)
counterclockwise to remove it.
7. Install a new LED (B).
8. Reverse Steps 2 through 6 to
reinstall the taillamp
assembly (A).

Back-Up Lamps

1. Open the trunk. See Trunk on
page 2 9 for more information.
I n f o r ma t i o n P r o v i d e d b y :
Vehicle Care
2. Remove the push pins holding
the trunk trim (B).
3. Move the trim aside far enough
to gain access to the bulb
assembly (A).
10-33