Chevrolet 2011 Malibu Owner's Manual page 120

5-6 Instruments and Controls
4. Press the button again until
the clock display stops flashing
to set the currently displayed
time; otherwise, the flashing
stops after five seconds and the
current time displayed is
automatically set.
To change the time default setting
from 12 hour to 24 hour, press
the button until 12H or 24H is
displayed. Once 12H or 24H is
displayed, turn the knob to the
desired option to select the setting.
Press the button again to apply
the setting, or let the screen
time out.
With Date Display
Radio with CD (MP3) and USB
Port, and Radio with Single CD
(MP3) Player
To set the time and date:
1. Turn the ignition key to ACC/
ACCESSORY or ON/RUN.
O
Press the knob to turn the
radio on.
2. Press the button and the HR,
MIN, MM, DD, YYYY (hour,
minute, month, day, and year)
displays.
3. Press the softkey located below
any one of the tabs that you
want to change.
4. To increase the time or date do
one of the following:
Press the softkey located
below the selected tab.
Press the SEEK, or
\
FWD button.
Turn the knob clockwise.
5. To decrease the time or date do
one of the following:
Press the SEEK or
s
REV button.
Turn the knob
counterclockwise.
I n f o r ma t i o n P r o v i d e d b y :
The date does not automatically
display. To see the date press
while the radio is on. The date
with display times out after a
few seconds and goes back to the
normal radio and time display.
To change the time default setting
from 12 hour to 24 hour or to
change the date default setting from
month/day/year to day/month/year:
1. Press the button and then the
softkey located below the
forward arrow label. Once the
time 12H and 24H, and the date
MM/DD/YYYY (month, day, and
year) and DD/MM/YYYY (day,
month, and year) displays.
2. Press the softkey located below
the desired option.
3. Press the button again to
apply the selected default, or let
the screen time out.