Tipping Radius; Product Dimensions - Jenn-Air JS42SEDUDW Installation Manual

Tipping Radius

Be sure there is adequate ceiling height to stand the refrigerator
upright when it is moved into place.
The dolly wheel height must be added to the tipping radius
when a dolly is used.
If needed, the tipping radius can be reduced. See "Reduce
Tipping Radius."
Side Tipping Radius
The side tipping radius varies depending upon the width of the
model. Use the chart provided to determine the side tipping
radius.
NOTE: Tip on side only.
A
Model
42
48

Product Dimensions

Side View
The depth from the front of the top grille to the back of the
refrigerator cabinet is 25³⁄₈" (64.5 cm).
The power cord is 84" (213 cm) long.
The water line attached to the back of the refrigerator is 5 ft
(1.5 m) long.
Height dimensions are shown with leveling legs extended ¹⁄₈"
(3 mm) below the rollers.
Tipping Radius A
93" (236.2 cm)
96" (243.8 cm)
³⁄₈
*83 "
(211.8 cm)
84" (213.4 cm)
Power Cord
*When leveling legs are fully extended to 1¹⁄₄" (3.2 cm) below
rollers, add 1¹⁄₈" (2.9 cm) to the height dimensions.
Top View
¹⁄₈
24 "
(61.3 cm)
¹¹⁄₁₆
23 "
(60.3 cm)
¹⁄₂
23 "
(59.7 cm)
Model A
42 Euro-Style 41" (104.1 cm)
48 Euro-Style 47" (119.4 cm)
®
42 Pro- Style 41" (104.1 cm)
48 Pro- Style ® 47" (119.4 cm)
³⁄₈
25 "
(64.5 cm)
³⁄₈
"
(9.53 mm)
¹⁄₂
*3 " (8.9 cm)
A
B
B
2¹⁄₈" (5.3 cm)
2¹⁄₈" (5.3 cm)
2⁵/₈" (6.67 cm)
2⁵/₈" (6.67 cm)
7