License Plate Lights Bulb Replacement; Rear Combination Light Bulb Replacement - Kia Ceed Owner's Manual

License plate lights bulb
replacement
1. Loosen the lens retaining screws
with a cross-tip screwdriver.
2. Remove the lens.
3. Remove the bulb by pulling it
straight out.
4. Install a new bulb.
5. Reinstall the lens securely with the
lens retaining screws.
OED076051
(1) Rear fog light (if equipped)
(2) Rear turn signal light
(3) Back-up light
(4) Stop and tail light
Rear combination light bulb
replacement
1. Open the rear hatch.
OED076052
2. Remove the service cover by turn-
ing the plastic screw counterclock-
wise and removing the cover.
Maintenance
OED076053
7 59