Kia Ceed Owner's Manual page 57

Installing a child restraint system by
lap/shoulder belt (on the rear seat)
To install a child restraint system on
the rear seats, do the following:
1. Place the child restraint system in
the desired position.
2. Extend the shoulder/lap belt from
its retractor.
E2MS103005
3. Route the
through the restraint according to
the seat manufacturer's instruc-
tions.
E2BLD310
lap/shoulder belt 4. Buckle the seat belt and allow the
seat belt to take up any slack. After
installation of the child restraint
system, try to move it in all direc-
tions to be sure the child restraint
system is securely installed.
If you need to tighten the belt, pull
more webbing toward the retractor.
Knowing your vehicle
MMSA3030
3 47