JVC DLA-RS2 Instructions Manual page 45

Command and data
Operating command and data (Binary code)
Command
0000
5057
4950
4754
4750
4752
4747
4742
5453
5243
Downloaded from www.Manualslib.com
Type
Connection check
Power supply
Input
Gamma table
Gamma coefficient
Gamma data (R)
Gamma data (G)
Gamma data (B)
Test pattern
Remote Control
manuals search engine
Data description
Checks whether communication is available between this unit and
the PC during standby.
During standby
31 : Turns on the power.
During power on
30 : Turns off the power. (Standby mode)
During power on
30 : S-VIDEO
31 : VIDEO
32 : COMP.
36 : HDMI 1
37 : HDMI 2
During power on
30 : Switches to "Normal".
31 : Switches to "Theater1".
32 : Switches to "Theater2".
33 : Switches to "Dynamic".
34 : Switches to "Custom".
30 : 1.8 35 : 2.3
31 : 1.9 36 : 2.4
32 : 2.0 37 : 2.5
33 : 2.1 38 : 2.6
34 : 2.2
Sets the gradation (0 ~ 1023) of the output signal in hexadecimal.
The data is 16 bit (2 byte) with the 2 byte data in the high/low order.
Same as gamma data (R).
Same as gamma data (R).
During power on
30 : Do not display.
36 : Displays staircase (gray).
Sends the same code as the supplied remote control.
"Remote control code" (pP47)
ENGLISH
45