JVC DLA-RS2 Instructions Manual page 41

D
Install the new lamp unit
E
Tighten the screws of the lamp unit
Fasten the screws with a + screwdriver.
F
Attach the lamp cover
Insert the top part (with 2 claws) of the lamp cover into the unit.
Fasten the screws with a + screwdriver.
Downloaded from www.Manualslib.com manuals search engine
Claws
ENGLISH
CAUTION
Use only genuine replacement
parts for the lamp unit. Also, never
attempt to re-use an old lamp unit.
This may cause a malfunction.
Do not touch the surface of a new
lamp. This may shorten the lamp
life and cause lamp blowout.
MEMO
After Replacing the Lamp
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Do not place the removed lamp
unit at locations reachable by
children or near combustible items.
Dispose used lamp units in the
same way as fluorescent lamps.
Follow your local community rules
for disposal.
41