Fast Or Slow Codes - Actron Super AutoScanner CP9145 User Manual

Ford Historic Diagnostics • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Fast or Slow Codes

Select Fast Codes or Slow Codes and
press (17(5.
Follow the instructions step-by-step.
Failure to perform these steps may set a
false DTC in the PCM — observe the
display.
1) Set Parking Brake.
2) Transmission In Park Or Neutral.
3) Turn A/C Off.
4) Start Engine — Let Idle Until Hot.
5) Turn Ign Key Off.
6) Wait 10 Seconds. Start Engine — Let Idle.
7) If Vehicle Has A Manual Transmission, Release Clutch.
Press (17(5 to activate the self-test.
The following actions do not apply to MECS vehicles.
The tool will prompt the user to:
5
Observe Screen for Prompt to Perform the next action.
After performing these steps, wait for the
tool to retrieve DTCs. When the test is
done, turn Ign Key OFF and press
(17(5.
Use the DOWN arrow key to begin viewing
codes.
5 – 4 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
For a 7.3L Diesel, depress the throttle until test is done.
If Applicable, set Octane Switch To Premium.
Work Steering Wheel
Pump Brake Pedal & Cycle OD (overdrive) Cancel Switch ONLY IF
PUSH BUTTON IS AVAILABLE.
Quickly Press And Release Throttle. One Time Only!
'7>75F A67 (KB7
[ S3EF A67E
S'>AI A67E
(7EF A?B>7F76
(GD@ 9@ 7K #88X
$D7EE "(& (A A@F
)E7 S FA H;7I A67EX
+D;F7 AI@ A67E
AD &787D7@57X ]