Product Features - HoMedics ShiatsuMAX Instruction Manual

IB-CBS1800-0613-01_Layout 1 17/06/2013 14:26 Page 5

PRODUCT FEATURES:

Demo Button - For a brief
demonstration of the features of the
Massager, press the Demo button.
The unit will briefly go through each
function. Once complete, the unit
automatically turns off. The L.E.D. light
will blink to indicate the active
s.
function
Shiatsu Massage - Shiatsu is a deep
kneading circular massage.
Shiatsu Programs
from 3 preset programs where the
Shiatsu massage travels up and down
in a specific area of the back. To select a
program, simply press the button and
the LED will illuminate. To deselect,
press the button again or press another
button.
= Full Back
= Upper Back
= Lower Back
Spot Shiatsu - While the unit is in
Shiatsu massage, press either button to
stop and focus the Shiatsu action in one
place. Once the unit is operating in Spot
Shiatsu, you may adjust the mechanism
position by holding down either button
until the desired position is reached.
Vibration Massage
invigorating vibration massage to
upper legs/thighs.
- Choose
- Adds
Heat
massage is on, simply press the
heat button and the corresponding
red L.E.D. light will illuminate.
To deselect, press the button again
and the corresponding L.E.D. light
will turn off.
For your safety, heat cannot be
turned on if massage is not
selected.
Power Button
first press the POWER button. The LED
indicator will illuminate and confirm
your selection. To turn off the unit,
simply press the button again. The LED
indicator will blink while the back
massage mechanism returns to its
lowest point and then it will turn off.
Perfect Fit
massage to your height, press the
"Perfect Fit" button at the highest
desired position. The massage heads will
not travel higher than that position for
the duration of the massage. To deselect
the Perfect Fit feature, press the "Perfect
Fit" button a second time. The massage
will return to its full travel.
Rolling Massage
Rolling is like two hands or thumbs
working up and down your back.
Choose from 3 preset programs where
the Rolling massage travels up and
down in a specific area of the back. To
select a program, simply press the
button and the LED will illuminate. To
deselect, press the button again or press
another button.
Width Adjustment
is in Rolling massage for the back, press
this button to adjust the distance or
width between the massage heads. With
each press, the massage heads will move
to the next available position.
- For soothing heat when
5
- To turn on the unit,
- To customize the
- While the unit