Goodman GME8 Technical Manual page 10

PRODUCT DESIGN
Thermostats:
NOTE: Complete lineup of thermostats can be found in the Thermostat Specification Sheets.
Filters:
Filters are required with this furnace and must be provided by the installer. The filters used must comply with UL900 or
CAN/ULCS111 standards. Installing this furnace without filters will void the unit warranty.
This furnace has provisions for the installation of return air filters at the side and/or bottom return. The furnace will
accommodate the following filter sizes depending on cabinet size:
Cabinet
Width
(in.)
All
Refer to Minimum Filter Area tables to determine filter area requirement. NOTE: Filters can also be installed elsewhere in
the duct system such as a central return.
MINIMUM FILTER SIZES for DISPOSABLE FILTERS
DISPOSABLE NOMINAL 300 F.M. FACE VELOCITY
10
Upflow Filters
Side Return(s)
Approx.
Nominal
Flow Area
Filter Size
2
(in.)
(in )
16 x 25 x 1 400
FURNACE INPUT
60M
80M
100M
Bottom Return
Cabinet Nominal
Flow Area
Width Filter Size
(in.) (in.)
17-1/2 14 x 25 x 1
21 16 x 25 x 1
FILTER SIZE
2
483 in
2
640 in
2
800 in
Approx.
2
(in )
350
400