Specifications - Blaupunkt NASSAU CR127 User Manual

Specifications

Power Specifications
Audio
Power Total Harmonic Distortion: 13 watts per channel minimum continuous average
Output and
output into 4 ohms, 4 channels driven, from 30-l 5,000 Hz with no more than 1% total harmonic
distortion.
Other Specifications
Tuner
FM
Tuning Range:
Intermediate Frequency:
FM Mono Sensitivity:
Seek lo sensitivity:
Seek sensitivity
Selectivity:
Signal-to-Noise Ratio:
Harmonic distortion at 1 kHz:
Separation:
Frequency Response:
AM
Tuning Range:
Seek lo sensitivity
Seek sensitivity:
Intermediate Frequency:
Signal-to-Noise Ratio:
Frequency Response:
Audio
Speaker Impedance:
Maximum Amp Power:
RMS Power:
Bass Control:
Treble Control:
Loud:
Cassette
Signal-to-Noise Ratio:
Tape Wow and Flutter:
Tape Frequency Response:
General
Dimensions (w/o projecting parts/controls):
Mass:
Power Requirement (neg. grnd.):
Operating Temperature:
Supplied Accessories:
Design and specifications subject to change without notice.
87.5 - 107.9 MHz
10.7 MHz
13 dBf
51 dBf
31 dBf
80 dB at 400kHz
65 dB (stereo), 70 dB (mono)
0.7% (stereo), 0.5% (mono)
30 dB
30-l 5,000 Hz + 3 dB
530 - 1,710 kHz
50 dBpV
25 dBpV
450 kHz
50 dB
4-8 ohms
4 X 30 Watts (at 4 ohms)
4 X 13 Watts (at 4 ohms) ~1% THD
+ 8 dB @ 60 Hz & + 2 dB @ 8 kHz
55 dB
0.10% dB
30-l 8,000 Hz + 3 dB
180 x 52 x 155 mm, 7 x 3 x 6'/8in.
Approx. 1.4 kg (3.0 lb.)
12 V DC car battery (1 l-l 6 V DC allowable)
15°F to 12O"F, -10°C to 50°C
Unit
l
Faceplate
l
Wire Harness
l
DIN Sleeve
l
. Mounting Hardware
Owner's Manual in English, French, Spanish and Portuguese
l
11