Check Transaxle; Speed Control; Brake System Warning; Engine Oil Pressure - Mercury Sable 2001 Owner's Manual

Instrumentation

Check transaxle

Momentarily illuminates when the
ignition is turned to the ON
position. Illumination of this light
indicates that a problem has been
detected and shifting may be
restricted. If this lamp remains on,
have your vehicle serviced
immediately.
Speed control (if equipped)
This light comes on when either the
CRUISE
SET/ACCEL or RESUME controls
are pressed. It turns off when the
speed control OFF control is pressed, the brake is applied or the ignition
is turned to the OFF position.

Brake system warning

Momentarily illuminates when the
! P
ignition is turned to the RUN
position to ensure the circuit is
BRAKE
functional. Also illuminates if the
parking brake is engaged. If the
brake warning lamp does not illuminate at these times, or remains on
after releasing the parking brake, seek service immediately.
One of the following conditions may exist:
• low brake fluid level in the reservoir.
• Brake force distribution system failure. The ABS light will also
illuminate if this condition is present.

Engine oil pressure

Momentarily illuminates when the
ignition is turned to the ON position
and the engine is off. Illuminates
when the oil pressure falls below the
normal range. Stop the vehicle as
soon as safely possible and switch off the engine immediately. Check the
oil level and add oil if needed. Refer to Engine oil in the Maintenance
and care chapter.
12