System Board - IBM 5150 Hardware Maintenance Manual

Check the speaker circuit if you have no beep.
1. Set your multimeter to the OHMS
(x
1) scale.
2. Remove the speaker connector from the System Board.
3. Connect leads to the speaker as shown.
- - - - - - - - - - - - - - - - - f ' , .
System
Board
IS THERE CONTINUITY AT THE SPEAKER CONNECTOR?
NO
Replace the speaker. See Section 3, "Removal/
Replacement. "
YES
Replace your System Board. See Section 3,
"Removal/Replacement. "
020-8