General Setup - Brother HL-4140CN User Manual

Control Panel

General Setup

Submenu
Local Language
Ecology
Panel Control
Setting Lock
Reprint
Interface
The factory settings are shown in Bold with an asterisk.
Menu Selections Options
English*/Français...
Sleep Time 0/1/2/3*/4/5...Min
Toner Save Off*/On
Button Repeat 0.1*/0.4/0.6/0.8/1.0/
1.4/1.8/2.0 Sec
Level 1*/Level 2.../Level 10 Sets the time in seconds that an LCD
Message Scroll
-nnonn+
LCD Contrast
Auto Online On*/Off
Off*/On
Off*/On
Select Auto*/USB/Network
1/2/3/4/5*.../99 (Sec)
Auto IF Time
Input Buffer Level 1/2/3/4*.../7
Descriptions
Changes the LCD language for your
country.
Sets the time to return to Power Save
mode.
Increases the page yield of the toner
cartridge.
Sets the time for the LCD message to
change when holding + or - at
intervals.
message will scroll across the LCD.
From Level 1=0.2 sec to Level
10=2.0 sec.
Adjusts the contrast of the LCD.
Sets the machine to the mode which
automatically returns to Ready state.
Turns the lock panel settings On or
Off using the password.
Turns the reprint settings On or Off.
Chooses the interface you use.
If you choose Auto, the machine
automatically changes the interface
to USB or Ethernet depending on
which interface is receiving data.
You need to set the time-out period
for the auto interface selection.
Increases or decreases the input
buffer capacity.
3
3
73