ooma HUB Quick Start Manual page 9

6
installing the ooma hub
Choose the example below that best matches your situation:
3
If you plan on using the ooma Hub with an existing landline or you plan on installing one or more ooma Scouts, follow the
directions below to connect your ooma Hub to your phone system. Otherwise, you may:
If you're not sure whether you have DSL or Cable, ask yourself this: Who do I pay for high-speed Internet service?
If you pay your phone company, you have DSL.
If you pay your cable television provider, you have CABLE.
See the
COnneCtinG tHe OOMa HUB tO yOUr PHOne SySteM
among the choices below.
Cable or fiber-optic Internet
Use the long phone cable provided and connect the
port labeled
wall
in the wall.
dSl & phone on separate lines
Leave your DSL modem connected as is.
1
UNpLUg and REMOvE any existing DSL filters or
2
splitters on your phone line (not your DSL line).
Use the long phone cable provided and connect the
3
port labeled
wall
jack in the wall (not your DSL jack).
dSl & phone on the same line
Plug the ooma splitter provided directly into the
1
phone jack in the wall. UNpLUg any existing DSL
filters or splitters from the wall.
Connect your DSL modem to one port of the ooma
2
splitter using the original DSL modem phone cable
(leaving any DSL filters connected to the modem).
Use the long phone cable provided and connect the
3
port labeled
wall
port of the ooma splitter.
on the ooma Hub to the phone jack
on the ooma Hub to the phone
on the ooma Hub to the other
section of the User Guide if you need help selecting
Phone Jack
WALL
Modem
DSL Jack Phone Jack
WALL
Modem
Phone / DSL Jack
ooma Splitter
WALL
Modem
SkiP tO PaGe 7